采用运营商级、高性能以太网核心交换芯片
交换机采用国产自研高性能以太网核心交换芯片,可满足城域网、企业网、数据中心、超融合等应用的需求。l
弹性端口形态、内置配置模板、清晰的端口状态指示
原生40G/100G端口形态,通过端口分拆可支持10G/25G模式。分拆后的逻辑端口有独立的端口状态指示灯,可清晰显示每个拆分端口的收发包工作状态方便运维。预制多种配置模板,一键切换端口模式:6*40G+2*100G/24*10G+2*100G/24*10G+8*25G/32*10G;
绿色节能的系统设计
采用智能的风扇调速方案,支持实时功耗检测,为客户降低运维成本,打造绿色节能网络。
可灵活配置的转发表项满足不同业务部署场景
灵活的表项管理技术FTM,支持根据不同的应用场景需求,调整各类硬件转发表项的大小。
高可靠性
现场可插拔模块化电源,支持对芯片组的温度、电源与风扇的状态进行实时监控。
支持MLAG/LACP/VRRP/STP/RSTP/MSTP/Smart Link/BFD/ERPS等特性,全面且高效的保护网络中的数据流量。
三网合一服务支持与带宽保证的高品质应用
三网合一服务(IPTV,视频监控等)提供了高带宽。内置的QoS功能和灵活的队列技术可保障高品质的服务。
丰富的组播协议集(IGMP snooping/IGMP v1/v2/v3),支持2K组播组,每组4K逻辑复制,完美支持IPTV业务,有效控制组播时延。
全面的网络安全策略
支持用户级、交换机级和网络级的安全控制。
基本的IPv4 / IPv6 / MAC ACL可以分别过滤IPv4 / IPv6/报文,并且,额外提供扩展的IPv4 / IPv6 ACL可以在一个规则内同时匹配报文的二、三、四层信息。以上ACL均可以应用到物理端口、VLAN、端口组和VLAN组上,端口组或VLAN组内的成员共享一套ACL规则,可以节省TCAM资源。
ARP检测和IP源防护功能,防止网络遭受恶意ARP攻击。 提供CPU流量保护、风暴控制功能,优化CPU负载功能。集中式的802.1x认证,禁止非法用户访问网络。
出色的管理特性
支持丰富的管理接口,包括Console、带内网口和带外网口、USB口;支持SNMPv1/v2/v3,支持CLI命令行,Web网管,TELNET及FTP配置使设备管理更方便,并且支持SSH2.0、SSL等加密方式,使得管理更加安全。
项目 |
S9500-6QF-2HQF |
固定端口 |
6*40GE QSFP+端口, 2*100G QSFP28端口 |
管理端口 |
1个Console口、1个带外网管口、1个USB |
交换容量 |
3.6Tbps |
包转发率 |
1480Mpps |
工作温度 |
-10~50°C |
存储温度 |
-20~70°C |
工作湿度 |
10%~90%无凝结 |
存储湿度 |
5%~95%无凝结 |
外观尺寸 |
355(L)×215(W)×44(H)mm |
整机重量 |
<3.3Kg |
防雷等级 |
6KV |
输入电压 |
AC:90~264V/50~60Hz |
整机功耗 |
<350W |
Feature |
Description |
||
Type |
Sub Type |
Feature |
|
Ethernet basic features |
Ethernet |
interface |
Ethernet interface operating modes(full duplex, half duplex, and auto) |
negotiation) |
|||
Ethernet interface operating rates |
|||
Jumbo Frame |
|||
port-xconnect |
|||
Flow-control |
Flow-control tx/rx |
||
storm-control |
Port based storm-control |
||
Port-block |
Port-block(know-unicast/unknow-unicast/know-multicast/unknow- |
||
multicast/broadcast) |
|||
Port-isolate |
L2/L3/All Port-isolate |
||
Uni-direction isolate |
|||
L2 Protocol Tunnel |
L2 Protocol Tunnel(support CDP/CFM/DOT1X/LLDP/SLOW-PROTO/STP/VTP |
||
Forward mode |
Store-and-forward |
||
Cut-through |
|||
VLAN |
VLAN Access mode |
Access/Trunk |
|
Default VLAN |
|||
VLAN Classification |
VLAN Classification(port based/mac based/ip based/protocal based) |
||
QinQ |
Basic QinQ |
||
Selective QinQ |
|||
VLAN Mapping(1:1 VLAN Translation) |
|||
VLAN Statistics |
VLAN Statistics |
||
Private VLAN |
Private VLAN |
||
Voice VLAN |
Voice VLAN |
||
Guest VLAN |
Guest VLAN |
||
MAC |
MAC Address Table |
Automatic learning and aging of MAC addresses |
|
Hardware Learning |
|||
Static and dynamic MAC address entries |
|||
blackhole MAC |
|||
MAC Flapping detect |
MAC Flapping detect |
||
Port Bridge |
Port Bridge |
||
LAG |
Link aggregation |
Static-LAG & LACP |
|
LAG load balance(SLB) |
|||
LAG load balance(DLB) |
|||
LAG load balance(RR) |
|||
LAG Self-healing |
|||
Link aggregation weighting |
|||
Ethernet Ring protection features |
xSTP |
STP |
Spanning-Tree Protocol |
RSTP |
Rapid Spanning-Tree Protocol |
||
MSTP |
Multi-instance Spanning-Tree Protocol |
||
Spanning-Tree Protocol Protection |
BPDU Filter/Guard |
||
Root Guard |
|||
Loop Guard |
|||
Anti TC-BPDU attack |
|||
ERPS |
ERPS |
Single ERPS ring |
|
tangent ERPS rings |
|||
intersecting ERPS rings |
|||
compatible with RRPP |
|||
Loopback Detect |
Loopback Detect |
Loopback-detection |
|
Layer2 Multicast |
Layer2 Multicast |
IGMP Snooping |
IGMPv1/v2/v3 Snooping |
Fast leave |
|||
Static IGMP snooping group |
|||
MVR |
MVR(Multicast VLAN Registration) |
||
IPv4 Forwarding |
ARP |
ARP |
Static and dynamic ARP entries |
Aging of ARP entries |
|||
Gratuitous ARP |
|||
ARP proxy |
basic ARP-Proxy |
||
local ARP-Proxy |
|||
IPv4 Unicast Routing |
IPv4 Static Routes |
IPv4 Static Routes |
|
blackhole Routes |
|||
co-work with IP SLA |
|||
VRF(Virtual Routing and Forwarding) |
|||
uRPF check |
|||
RIP |
RIPv1/v2 |
||
Route policy |
Route-map |
||
IPv4 prefix-list |
|||
PBR |
PBR(Policy-based Routing) |
||
ICMP |
ICMP redirect |
||
ICMP unreachables |
|||
ECMP |
ECMP(SLB) |
||
ECMP(DLB) |
|||
ECMP(RR) |
|||
ECMP Self-healing |
|||
ip unnumbered |
ip unnumbered |
||
IPv4 Multicast Routing |
IGMP |
IGMPv1/v2/v3 |
|
IGMP-Proxy |
|||
IGMP SSM Mapping |
|||
VRRP v3 |
VRRP v3 |
||
VRRP |
VRRP |
VRRP |
|
Track for VRRP |
|||
|
Smart Link |
Smart Link |
multi-instance |
load balance |
|||
Multi-Link |
|||
Monitor-link |
|||
MLAG |
MLAG |
MLAG basic |
|
MLAG orphan Port |
|||
QoS features |
QoS |
Traffic classification |
Traffic classification based on COS/DSCP (simple classification) |
Traffic classification based on ACL ( complex classification) |
|||
Traffic classification based on inner header of the tunnel packets |
|||
Traffic behaviors |
Queue scheduling |
||
Remark the priority fields(COS/DSCP) of the packet based on ACL |
|||
Remark the priority fields(COS/DSCP) of the packet based on Table Map |
|||
Flow redirection |
|||
Flow mirror |
|||
Traffic policing |
Traffic policing based on direction(in/out) of Port |
||
Traffic policing based on direction(in/out) of VLAN |
|||
Traffic policing based on direction(in/out) of flow |
|||
Traffic policing based on direction(in/out) of aggregated flow |
|||
Traffic shaping |
Queue based traffic shaping |
||
Port based traffic shaping |
|||
Congestion management |
SP(Strict Priority)scheduling |
||
WDRR(Weighted Deficit Round Robin)scheduling |
|||
SP + WDRR mixed scheduling |
|||
Congestion avoidance |
TD(Tail Drop) |
||
WRED(Weighted Random Early Detection) |
|||
Traffic statistics |
Packet counts and bytes statistics based on traffic classification |
||
Packet counts and bytes statistics based on the color after traffic policing |
|||
Forwarded and discarded packet counts and bytes statistics |
|||
Data Center |
VARP |
Virtual gateway |
VARP(Virtual-ARP) |
VARP subnet |
|||
Security and management |
System Security |
SSH |
SSHv1/v2 |
RSA Key generation |
|||
RADIUS |
RADIUS |
||
TACAS+ |
TACAS+ |
||
AAA |
Authentication |
||
Authorization |
|||
Accounting |
|||
Dot1x |
Port based dot1x |
||
MAC based dot1x |
|||
Guest VLAN |
|||
ACL |
MAC/IP ACL |
||
Basic Mode ACL |
|||
Port-group ACL |
|||
VLAN-group ACL |
|||
IPv6 ACL |
|||
ACL UDF |
|||
Global ACL |
|||
Time Range |
|||
ARP Inspection |
ARP Inspection |
||
IP Source Guard |
IP Source Guard |
||
Port Security |
Limitation on MAC address learning on interface |
||
VLAN Security |
Limitation on MAC address learning on VLAN |
||
Control Plane Policy (COPP) |
Black list/wihte list |
||
Rate limit |
|||
CPU Traffic Limit |
CPU Traffic Limit |
||
Prevent DDOS attack |
Prevent DDOS attack (ICMP Flood/Smurf/Fraggle/LAND/SYN Flood) |
||
Login filter |
Telnet/SSH ACL filtering |
||
Telnet/SSH IPv6 ACL filtering |
|||
Link-Flapping detection |
Link-Flapping detection |
||
Network Management |
DHCP |
DHCP Server |
|
DHCP Relay |
|||
DHCP Snooping |
|||
DHCP Client |
|||
DHCP Option82 |
|||
DHCP Option252 |
|||
RMON |
RMON |
||
sFlow |
sFlow v4/v5 |
||
IP SLA |
IP SLA |
||
EFD |
Elephant Flow Detection |
||
NTP |
NTP(Network Time Protocol) |
||
Errdisable |
Errdisable detection and recovery |
||
DNS |
Static DNS Client |
||
LLDP |
LLDP |
||
Management |
Terminal Services |
Command Line Interface |
Configurations through CLI (Command Line Interface) |
Help information |
Banner configuration |
||
Help information in English |
|||
Terminal service |
Vty Terminal service |
||
Console Terminal service |
|||
Management Port |
Management interface |
Inband management interface and configuration |
|
Outband management interface and configuration |
|||
User privilege management |
Privileged user proirity and privileged commands |
||
Configuration and maintenance |
Configuration Management |
SNMP |
Network management based on SNMPv1/v2c/v3 |
Public and private MIB |
|||
Public and private Trap |
|||
WEB |
Configuration and management based on WEB UI |
||
RPC-API |
Configuration and management based on RPC-API |
||
SmartConfig |
SmartConfig(Automatically configuration when system start) |
||
OVSDB |
Configuration and management based on OVSDB |
||
system profile configuration |
change the system specifications by choose different STM Profiles |
||
License control |
Feature configuration based on License |
||
Restore factory default |
Restore factory default configuration |
||
configuration |
|||
File System |
File system |
File system(support directory and file management) |
|
Upload and download |
Upload and download files through FTP or TFTP |
||
Upload and download files through Xmodem |
|||
Debugging And Maintenance |
Debug |
per-module Debug features |
|
ICMP Debug |
|||
BHM |
Software process monitor: BHM(Beat Heart Monitor) |
||
Hardware Watch Dog |
|||
Log & alarm |
CPU usage display and alarm |
||
Memory usage display and alarm |
|||
Device temperature、PSU、FAN、status display and alarm |
|||
User operation logs |
|||
Management of logs, alarms, and debugging information |
|||
VCT |
VCT(Virtual Cable Test) |
||
system diagnostics |
Detailed Diagnostic-information collection |
||
Reboot |
Manual reboot |
||
Schedule Reboot |
|||
Reboot Information logging |
|||
network diagnostics |
Ping |
||
IPv6 Ping |
|||
Traceroute |
|||
mirror |
Port mirror |
||
Flow mirror |
|||
Remote mirror |
|||
Multi-destination mirror(m:n) |
|||
Use CPU as mirror source |
|||
Use CPU as mirror destination and analyze packet |
|||
ERSPAN |
|||
CPU statistics |
To CPU/From CPU packets statistics |
||
L2 Ping |
layer2 network connectivity detection - L2Ping (MAC Ping/Trace) |
||
UDLD |
UDLD(Unidirectional Link Detection) |
||
unidirectional |
unidirectional forwarding of the fiber |
||
Loopback |
port loopback |
||
hardware loopback(internal/external) |
|||
System time |
Time configuration |
||
Timezone |
设备名称 |
设备信息 |
S9500-6QF-2HQF |
6个40G QSFP端口,2个100G QSFP28端口; |
模块 |
模块信息 |
QSFP+-40G-SR4-MM850 |
40G QSFP模块SR4多模模块,MPO接口,波长850nm,传输距离100m |
QSFP28-100G-SR4-MM850 |
100G QSFP28模块SR4多模双芯,MPO接口,波长850nm,传输距离100m |